1.7

l
Pattern Catalog ID: When the Number of Holes is not the default in the option
above, use the drop-down to select the Pattern Catalog ID for the hole making.
Sheet Configuration Tab
This tab defines how different Print Context Sections output on different Media and using
different Master Pages.
There are multiple groups, each defining the settings for individual position within the section
as it outputs: First, Middle and Last sheet, as well as a group for Single sheets.
This tab contains the following options:
l
Duplex: Check to enable content to be printed on the back of each sheet. Your printer
must support duplex for this option to work.
l
Tumble: Check to enable tumble mode so pages are duplexed as in a notebook (on
Portrait output, this would be equivalent to short-edge duplex).
l
Same for all positions: Check to enable a single group below, which defines the same
options for all positions in the document. If unchecked, individual position options are
available.
The next options are identical for all positions, but of course only affects the position where you
change the options:
l
Allow content on: Selects on which face of the sheet content is allowed. If "Front only" or
"Back Only" is selected, the other page may contain a Master Page, but no contents will
be printed on it. As such it does not count in the "Content Page Number" and "Content
Page Count" markers which can be inserted via the Insert menu.
l
Media: Defines the media that is used. If the Media has Preprinted Media defined, the
selected preprinted media image is shown as a background to each page that correspond
to the media's sheet position.
l
Edit Script: Click to open a Script Editor dialog. The script defines what Media is
used, so it can be dynamically defined using data from the source record or the
extracted record.
l
Master Page Front: Defines the Master Page used for the front of the selected sheet's
position. Disabled if "Back Only" is selected under Allow content on.
Page 640