1.7

l
Port: Enter the port through which to communicate with the Print Server. Default is
9340.
l
Username: Enter the username to authenticate to the Print Server. Default is ol-
admin. This is set on the server's "Server Security Settings" on page75.
l
Password: Enter the password to authenticate to the Print Server. Default is
secret.
l
Confirm Password: Re-enter the password above.
l
External sort command timeout (seconds): Enter the number of seconds to wait for an
external sort command before giving up. External sort commands are set up in the Sorting
Options page of the Output module.
Print Measurements Preferences
l
Units: Use the dropdown to specify the default measurements system used for
dimensions of the template and boxes. In addition it defines the coordinates/position of
box elements.
The default unit will be added automatically when geometry values are entered without a
unit in the Attributes pane or in the Box Properties dialog.
l Flip insert guide axis: Check this option to flip the axis on which guides are inserted.
Normally, dragging a guide from a horizontal ruler inserts a horizontal guide (see
"Guides" on page503). With this option checked, dragging a guide from a horizontal ruler
inserts a vertical guide.
Saving Preferences
The saving preferences are a way control if and how often PlanetPress Connect saves your
work in the background, and if how many backup files it creates when you save the template or
data mapping configuration. See also: "Saving a template" on page279.
Auto Save
After a template or data mapping configuration has been saved for the first time, Connect
Designer can auto save it with a regular interval.
l
Enable: activate the Auto Save function.
l
Interval (minutes): enter a number of minutes, e.g. 3 to auto-save the template or data
mapping configuration every 3 minutes.
Page 629