1.7

l
Delete: Delete the currently selected color.
l
Duplicate: Duplicate the currently selected color using the name [color]CopyX.
Edit color
You can edit the following color properties.
l
Name: Enter the name of the color. This name should not contain spaces or special
characters.
l
Create name based on values: Check so that the name is automatically based on the
color slider values below.
l
Type: Use the drop-down to specify which type of color this should be: either a Tint or a
Color.
l
Option group: contains the options for the chosen type. Options change depending on
the selected type.
l
Color:
l
Model: This can be either CMYK or RGB.
l
Spot Color: Check to set the color as Spot Color. When Spot Colors are used,
the Name must match that of the spot color used in the printer.
l
Cyan/Magenta/Yellow/Black (CMYK): Each slider sets a percentage for the
color. Set the values using the sliders, or type in the percentage directly in the
input boxes.
l
Red/Green/Blue (RGB): Each slider sets the values of 0-255 for the color. Set
the value using the sliders or type in the value directly in the input boxes.
l
Color Preview: Box displaying the preview of the color (converted to RGB
when relevant).
l
Tint:
l
Source: Select an existing Color in the template. The tint or opacity will be
applied to this color.
l
Tint/Opacity: The slider sets the percentage of tint or opacity. Set the value
using the slider, or type the percentage directly in the input box.
l
Use Opacity: Check to set the Tint slider to use Opacity instead.
Page 595