1.4

Binding Style. Only Stapled and Stitched bindings have a Location option
available to them.
l
Angle: Set Stapling or Stitching binding either horizontally, vertically, or at an angle
(as supported by printer).
l
Item count: Select the amount of Staples or Stitches to use. The choice is between
the default amount or selecting a specific number using the Count option.
Tip
The options actually available to you at print time will be printer dependent, so
you will need to know the capabilities of your printer, or leave the value set to
Default.
l
Area: The area where the binding can be applied.
l
Hole making group:
Hole making options are available only to Ring, Comb (wire and plastic) and Coil Binding
Styles. The selections will need to be made at run-time based upon the types of binding
options available that the printer supports.
l
Number of holes: The number of holes to punch for the selected Binding option.
l
Style The style of hole punches for the selected Binding option.
l
Pattern Catalog ID: The Catalog IDof the selected Binding option.
Data Filtering Options
The data filtering page is used to filter records and prevent them from being printed. Conditions
are evaluated on each record.
Data Selection Filter
l
Grouping: Displays the type of line, either a Rule or a rule Grouping. The root of each
group of rule is a drop-down selector that defines how the rules inside the grouping work
together, which is either to make any of the rulesorall of the ruleshave to be true for the
group to be true.
l
Field: Use the drop-down to select the field on which to make the comparison.
l
Operator: Use the drop-down to select the comparison operator for the condition.
l
Value: Type in a value for the comparison.
l
Add: Click to add a new line to list. Different options are available in this menu, such as
filtering by field, media and finishing properties, or document length.
Page 583