1.4
Table Of Contents
- Table of Contents
- Welcome to PlanetPress Connect 1.4.2
- Setup And Configuration
- DataMapper Module
- The Designer
- Mark Position Options
- Additional Text Settings
- Additional Image Settings
- Barcode Options
- Codabar Settings
- Code 128 Settings
- Code 39 Settings
- Additional Datamatrix Settings
- Additional EAN 128 Settings
- Additional EAN 13 Settings
- Additional EAN 8 Settings
- Additional Interleave 2 of 5 Settings
- Additional PDF417 Settings
- Additional QR Code Settings
- Additional UPC A Settings
- Additional UPC E Settings
- Additional OMR Mark Settings
- Keystore
- PDF Signature
- Copyright Information
- Legal Notices and Acknowledgements
l
Duplex: Check to enable content to be printed on the back of each sheet. Your printer
must support duplex for this option to work.
l
Tumble: Check to enable tumble mode so pages are duplexed as in a notebook (on
Portrait output, this would be equivalent to short-edge duplex).
l
Same for all positions: Check to enable a single group below, which defines the same
options for all positions in the document. If unchecked, individual position options are
available.
The next options are identical for all positions, but of course only affects the position where you
change the options:
l
Allow content on: Selects on which face of the sheet content is allowed. If "Front only" or
"Back Only" is selected, the other page may contain a Master Page, but no contents will
be printed on it. As such it does not count in the "Content Page Number" and "Content
Page Count" markers which can be inserted via the Insert menu.
l
Media: Defines the media that is used. If the Media has Preprinted Mediadefined, the
selected preprinted media image is shown as a background to each page that correspond
to the media's sheet position.
l
Edit Script: Click to open a Script Editor dialog. The script defines what Media is
used, so it can be dynamically defined using data from the source record or the
extracted record.
l
Master Page Front: Defines the Master Page used for the front of the selected sheet's
position. Disabled if "Back Only" is selected under Allow content on.
l
Master Page Back: Defines the Master Page used for the front of the selected sheet's
position.Disabled if "Back Only" is selected under Allow content on, or if Duplex is
unchecked.
Background Tab
This tab defines the background for the current Print Context Section. It contains the following
options:
l
General group:
l
PDF: Select the PDF to use as the section's background: a PDF Datamapper Input
or a PDF Resource.
l
Path: The path to a PDF Resource. Enter a path and file name or click the Browse
button to open the Select Image dialog; see "Select Image dialog" on page 477.
Page 474