1.2

Table Of Contents

Project Information

A step-by-step animation of this section is available online on http://www.ppenvelopenow.com/support/

Assigned Printer

Click the drop-down list and select the printer where the project will output. The printers in this list are the ones installer on

your system. PlanetPress EnvelopeNOW will use the driver settings included in the job file if they are available or use the

printer's default settings.

Name

Specify the name you want for your project. This name will appear whenever you need to select a project, for example when

modifying an existing project or printing a job. It is always good practice to give your project a name that you will immediately

recognize, such as "Regular Invoice Run on DI350".

If you are modifying an existing project and you change the name, PlanetPress EnvelopeNOW will create a copy of

your project with the modifications you just did while keeping the original copy intact.

Description

These notes will help you detail the project information. PlanetPress EnvelopeNOW automatically generates some information

such as the hardware configuration used, the location of the captured file, boundary definitions and duplex settings. You can

edit these notes as you see fit. The notes will appear to describe the job whenever you print a job from the home screen.

Click on Reset Description if you want to re-create the original description from your project information.

Finish Up

Click on Preview if you want to preview what the output will look like. This creates a temporary PDFof a maximum of 50

pages, with the scan marks and all other settings from the project.

Click on Info to display a Hardware Configuration Sheet that lists all of the project's details. This page can be used to con-

figure the Folder Inserter and can be printed from your Internet browser when it opens.

Click the Save button to save and close the project when you are done.

For ease of use, PlanetPress EnvelopeNOW always saves your projects in the same location which cannot be mod-

ified.

Create a new project