1.2

Table Of Contents

Combining conditions

Creating a new condition

To create a new condition, click the button. Define a new region selection in your preview for this new condition. Select the

condition type and modify the content of the text box, if appropriate.

The

changes

condition should only be used as the

last

condition in the set. If it is not the last, it may not function cor-

rectly.

Deleting a condition

To delete a condition, go to the condition you want to delete and click the button. The condition will be removed.

Navigating between conditions

To navigate between conditions, click the and buttons. The label between the buttons indicates the number of conditions

and the currently visible one (for example, 1 of 2).

Selecting how conditions are combined

You can combine the conditions in two ways:

l All conditions are met:The condition will only become true if

ALL

the combined conditions are true.

l At least one condition is met:The condition will be true if

ANY

of the combined conditions is true.

Define 2-Sided Printing

A step-by-step animation of this section is available online on http://www.ppenvelopenow.com/support/

1. Settings

This option is used to prepare the job that PlanetPress EnvelopeNOW sends to the printer. It changes two things:

l The addition of extra pages:If your job will print in long-edge or short-edge and you select the correct option

here, an addition blank page will be added at the end of each mail piece when that mail piece has an odd number of

pages. This forces the first page of the next mail piece to always be on the front of a sheet.

l The position of the scan marks:If you place your scan marks on the back of the page, using long-edge or short-

edge correctly will determine the exact location of the scan marks on the back, so your Folder Inserter knows where to

read them. If you do not select the correct option, the Folder Inserter may not be able to see your scan marks.

If your job is single sided and you are printing the scan marks on the front, simply select "None".

2. Scan Mark Position

l Front: The scan marks will appear on the front side of each sheet.

l Back: The scan marks will appear on the back side of each sheet. If you selected "none" in the duplex option, Plan-

etPress EnvelopeNOW will automatically create a back page containing only the scan marks.

Create a new project