1.2

Table Of Contents

Select a configuration file and sample document

A step-by-step animation of this section is available online on http://www.ppenvelopenow.com/support/

Hardware Configuration File selection

The Select a Hardware Configuration box shows a list of hardware configurations that have been installed on your system and

are currently active. Click on any of the hardware configurations in the list to select it. If your hardware configuration does not

appear or if you want to remove hardware configurations you do not use, please refer to "Configuration" (page 27).

Fold Type selection

Click on the

Select a Fold Type

box to display a drop down menu that lists the available fold types supported by the chosen

hardware. Click on the one you want to use.

Sample File

Click on the

Select a Sample File

box to display a drop down menu that lists all of the printers installed on your system as well

as the

Browse...

option.

l Browse...: If your sample job file is a local PDFFile on your computer, click on

Browse...

then navigate to the location

of the PDF file on your computer.

l Any printer: If you do not have a sample PDFready, you can capture your job on-the-fly. Start by opening your appli-

cation, then print your job to the PlanetPress EnvelopeNOWprinter which was created during installation. Then, select

the printer from the sample file drop down menu in this window. The job will be imported, along with any driver set-

tings that you selected when printing (for example, duplex settings).

You can only capture a sample file from a local, non-shared printer which means network and shared printers cannot be used.

In order to capture a job, you need to be an administrator on the machine (in Windows Vista and 7, you also need elevated

privileges). Only the first 50 pages of your sample file will be shown in the preview at any given time however when you print

your job, all the pages are printed.

You can also capture a sample file from a different printer, but this printer has to be

paused

so it queues the job but

does not actually print it. Additionally, you must be using a printer that uses a PostScript driver. Finally, this printer

must be in RAWmode so the information is useable by PlanetPress EnvelopeNOW. When you select any printer other

than the EnvelopeNOWprinter, PlanetPress EnvelopeNOW will automatically ask you to convert it to RAWmode.

Identify the mail piece boundaries

A step-by-step animation of this section is available online on http://www.ppenvelopenow.com/support/

Create a new project