2021.1

Note
As opposed to the other settings, the printer name can’t be changed after installation.
Logging
The OL Connect Send Printer Driver creates one log file per printer per day. (For information
about all log files, see "Log files" on page71.) The number of log messages can be set by
choosing the log level. Available log levels are:
l
DEBUG: Logs all messages and is intended to be used only for bug research. It is not
recommended to have the log level set to DEBUG for a long period, as this will have an
impact on the driver's processing speed. This mode will include INFO, WARN and
ERROR messages too.
l
INFO: Logs initialization messages. Administrators may choose this level for an initial
installation to supervise the operation of the driver. This mode will include WARN and
ERROR messages too.
l
WARN: This is the default level and should be used for production use. In this mode log
files may be empty: this is by design and indicates, that the printer and the driver work as
expected. This mode will include ERROR messages too.
l
ERROR: For users familiar to OLCS, this log level reduces the overhead to a minimum. It
is intended for machines where OLCS has been working error free for several weeks.
Note
This setting has an impact on the number of messages shown and logged by the OLCS
Notifier (see "OLCS Notifier" on page37).
When done, click Next to continue.
Finishing the installation
At this point Setup has collected all the required information for creating and installing the
printer driver. Asummary page will then appear.
Page 23