1.6

Section Description Default
set to 0, the OLCS Notifier will not be started until the
user logs in.
Note
Set StartTBN to 0 for mass deployment of the
Printer Driver. Starting the OLCS Notifier during
setup in a silent installation will lead to issues
when the user logs in.
This setting is only valid with the very first installation
of OL Connect Send. If the OLCS Notifier is not
running and the setup is started again on a machine
where at least one OL Connect Send printer is
already installed, the OLCS Notifier will not be
touched by the setup.
Reboot requirement
Depending on what applications and Visual C++ runtimes already installed, a reboot may be
required after the successful installation of the OL Connect Send Printer Driver.
In this case the silent installer will:
l Return the exit value 3010 (= "Reboot required". See e.g. Windows installer error codes).
l Log a respective message in the log file.
The administrator needs to make sure, that the respective machine is rebooted so that OL
Connect Send can work as expected.
Installation errors
When the installation fails, the error level value can be evaluated to check for success
(errorlevel = 0) or failure (errorlevel <> 0). It is up to the installing person to react upon this error
level.
Page 25