1.6

l
WARN: This is the default level and should be used for production use. In this mode log
files may be empty: this is by design and indicates, that the printer and the driver work as
expected. This mode will include ERROR messages too.
l
ERROR: For users familiar to OLCS, this log level reduces the overhead to a minimum. It
is intended for machines where OLCS has been working error free for several weeks.
Note
This setting has an impact on the number of messages shown and logged by the OLCS Notifier (see
"OLCS Notifier" on page26).
When done, click Next to continue.
Finishing the installation
At this point Setup has collected the required information to install the printer driver and create
it. The next screen will ask you to continue by clicking the Install button.
A progress bar is shown, while the installation process is running.
After a successful installation, the Finish dialog is shown. Click Finish.
Note
Reboot requirement
Depending on what applications and Visual C++ runtimes already installed, a reboot may be
required after the successful installation of the OL Connect Send Printer Driver. A respective dialog
is shown to the user in this case, offering to do a restart right away or chose to do it at a later
moment.
If this message should be shown, a reboot is mandatory before using OL Connect Send,
otherwise it may not work correctly!
Your OLCS printer driver is now installed:
Page 17