1.5

Page 4
If Workflow is active, the Test button can be used to validate the connection. (It does not check
if the OLCS plug-in is installed and answering.)
If the No interaction checkbox is enabled, it will cause this printer to send jobs to the server
without requesting an HTML response. Use this mode to deliver print jobs without further
interaction. When enabled, a web browser window will not be opened, but SysTray messages
will pop up indicating job transmission success or failure.
Enable secure communication (HTTPS): When selecting this option, the Printer Driver and
Workflow will communicate using the secure HTTPS protocol (data transfer is secured and
encrypted).
Accept all certificates: When HTTPS is selected, by default the Printer Driver will only accept
valid certificates on Workflow. If a self-signed certificate is sufficient for the transfer the root
validation of the certificate can be switched off.
For additional information about secure file transfer, HTTPS certificates and how to request a
countersigned certificate, please see SSL HowTo and Apache SSL/TLS respectively.
When done click Next to continue.
* 8080 is the default port for communications with Workflow, but it can be changed. It can be checked
in the Workflow preferences under “Plug-in” – “HTTP Server Input 1” – “Protocol options” – “Port”.