1.5

Page 6
3. Printer Name and Logging
In the Printer name and logging screen you can set a name for the printer you wish to
create and setup the logging level.
Printer name
The setup program will check if a printer with the same name and number already
exists. If so, the number is automatically increased until no matching printer name is
detected. This then becomes the proposed printer name in this dialog.
As opposed to the other settings, the printer name can’t be changed after installation.
Logging
OLCS creates a log file per printer per day. The number of log messages can be set by
choosing the log level. Available log levels are:

DEBUG:
Logs all messages and is intended to be used only for bug research. It is not
recommended to have the log level set to DEBUG for a long periods, as this will have an
impact on the driver's processing speed. This mode will include INFO, WARN and ERROR
messages too.

INFO
: Logs initialization messages. Administrators may choose this level for an initial
installation to supervise the operation of the driver. This mode will include WARN and
ERROR messages too.

WARN:
This is the default level and should be used for production use. In this mode log
files may be empty: this is by design and indicates, that the printer and the driver work as
expected. This mode will include ERROR messages too.

ERROR
: For users familiar to OLCS, this log level reduces the overhead to a minimum. It is
intended for machines where OLCS has been working error free for several weeks.
When done click Next to continue.