Installation Manual

Off The port is not enabled.
Solid Green The phone is ready to be used.
Flashing Green The phone is in use.
Off The OBi is not receiving power.
Solid Green The OBi is operational.
Flashing Green The OBi is looking for a DHCP IP address.
Flashing Orange The OBi is upgrading. Do not unplug power!
Solid Red The OBi is non-operational.
Flashing Green Light flashes when there is data activity
(Intermittent) (Intermittent) on the Internet Ethernet port.
Flashing Green Light flashes when there is
(Intermittent) data activity on the LAN
Ethernet port.
Power
Internet
LAN
USB*
Phone 2
Phone 1
OBi202 Rear
Power Outlet Internet Router Computer/LAN Phone 2 Phone 1
or Modem
(optional) (optional)
OBi202 Connections
A. Connect a phone to the green PHONE 1 port - Use cable currently connected to phone.
Note: An optional second phone or fax machine can be used with the Phone 2 port.
B. Connect one end of the Ethernet cable to the blue INTERNET port and the other end to an
Ethernet port on your Internet router, broadband modem or Ethernet switch.
C. Connect the power adapter to the OBi power jack and a power outlet.
Please observe the following steps to install the OBi.
OBi202 Installation
OBi202 Device Ethernet Cable Power Adapter
Please check to see that you have the following:
1. OBi202 Device
2. Ethernet Cable
3. Power Adapter
You will also need:
1. One touch tone phone.
This can be an analog or digital, corded or cordless phone. This can be an analog or digital, corded or cordless phone.
2. An active Internet connection.
3. Access to the Internet via an Ethernet port on your router or modem.
Note: You may use the OBi202 as a router by connecting the OBi202 directly to your broadband modem.
4. (Optional but very useful) An Internet phone service subscription with all
required username and password credentials.
*The OBi202 USB port may be used to connect an external storage device.
Installation Requirements
Step 1 Step 2
Copyright © 2012 Obihai Technology, Inc. All rights reserved.
Thank you for choosing Obihai Technology www.obihai.com
OBiTalk Network - Do Not Use For Emergency Service Calls
Obihai Technology does not warrant the availability or quality of the OBiTalk network.
Furthermore, Obihai Technology will not be liable to you or any third party for any costs
or damages arising directly and or indirectly from the use of this product’s hardware &
software including without limits any damage, or for any loss whatsoever.
Replacement, Repair, Refund
After the acceptance of a Return Material Authorization (RMA) request, Obihai will
attempt to refund, repair or replace the product. To request an RMA, please contact
the party from whom you purchased the product.
1-Year Limited Hardware Warranty
Obihai Technology provides a 1-Year limited hardware warranty. Obihai warrants
to customer that this product will conform to its published specifications and will be
free from defects in material and workmanship at the time of delivery and for a period
of 1-Year thereafter. Without limiting the foregoing, this warranty does not cover any
defect resulting from (a) any design or specification supplied by an entity other than
Obihai, (b) non-observance of technical operating parameters (e.g. exceeding limitingObihai, (b) non-observance of technical operating parameters (e.g. exceeding limiting
values) or (c) misuse, abuse, using in abnormal conditions or alterations of any kind.
Warranty Information
www.obihai.com
With Regulatory, Compliance & Safety Information
Installation & Configuration Guide
Quick Start Guide