MSH-05 Monopod Support Holster You’re on steady ground ®
Thank you for choosing Oben. The Oben MSH-05 monopod support holster will hold an extended monopod in the support pocket to minimize arm fatigue or conveniently carry a collapsed monopod in the holster sleeve. Touch-connect strips create a belt loop for support that’s comfortable to wear over extended periods. Setup 1. Unfold the holster with the pockets facing away from you. 2. Fold the top flap over and behind your belt, and attach it to the touch-connect strip on the back of the holster.
Monopod Holster For use as a holster, place a collapsed monopod foot-first into the rear sleeve. Packing Up 1. Unfasten the belt loop, and remove it from your belt. 2. Smooth the pockets down so the holster is flat. 3. Fold up the holster from the bottom, and attach the touch-connect strips. 4. Use the carabiner to attach the folded holster to a belt loop, camera bag, or backpack.
One-Year Limited Warranty This Oben product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
