User Manual

4
OPERATION
1. Mount Rail to Tripod
1. If the tripod has a 1/4″-20
mounting stud, proceed to
step 2. If the tripod has a
3/8″ mounting stud, use the
included wrench to remove
the reducer bushing from one
of the sockets on the bottom of
the focusing rail.
2. Align the mounting socket
of the focusing rail with the
mounting stud of the tripod.
Be careful to hold it straight
over the stud.
3. Screw the focusing rail
onto the tripod by turning it
clockwise onto the stud until
it’s seated tightly against the
tripod platform. Make sure
there are no gaps between the
base and the tripod.
Important: If your tripod has set
screws on the platform, tighten
them to secure the focusing rail to
the tripod.