User Manual

ManualsBrandsOben ManualsMonopodsCTM-2500 5-Section Carbon Fiber Monopod with VH-R2 Tilt Monopod Head Kit

You’re on steady ground

™

CTM-2400/2500

CTM/ATM-2600

Monopod

Summary of content (8 pages)

PAGE 1
CTM-2400/2500 CTM/ATM-2600 Monopod You’re on steady ground™
PAGE 2
INTRODUCTION Thank you for choosing Oben. Oben monopods are versatile and durable supports. Both carbon fiber and aluminum models are constructed to provide rigidity and strength to support for your camera. The leg features secure twist locks for swift height adjustment. And leg sections, designed with anti-twist alignment, are extremely easy to operate when opening and collapsing the monopod.
PAGE 3
Overview Integrated Mount Wrist Strap and Belt Clip The top mount attaches a camera or a lens collar directly onto the monopod. A tilt head can be used for greater control. Wrist strap for more secure handling while shooting. Belt clip offers a convenient carry option. Twist Locks Twist locks provide quick and secure height adjustment. Leg Warmer Padded leg for handling the monopod in cold weather.
PAGE 4
OPERATION 1. Height Adjustment Twist the lock clockwise , and reposition the leg . Then twist the lock counterclockwise until secure. 2. Mounting Screw The monopod comes with a reversible 3/8-16 and 1/4-20 mounting screw that allows you to mount any tripod head or camera. To switch between the two sizes, loosen the set screw with the included hex key. Then unscrew the plate and reverse the screw. Screw the plate back onto the tripod until it’s secure, and retighten the set screw.
PAGE 5
OPERATION 3. Mounting a Head Align the head’s socket with the monopod’s mounting screw , and twist it clockwise until fully secured. Be sure that the bottom of the head is flush with the plate. For compatible heads, tighten the three integrated set screws with the included hex key . Important! Do not overtighten the head or the set screws. Overtightening may damage the monopod or head. 4.
PAGE 6
OPERATION 5. Belt Clip The monopod’s wrist strap includes an integrated belt clip. Slide the clip onto your belt for hands-free transport. 6. Retractable Spike A spike is built into the monopod’s rubber foot. Use the rubber foot for indoor or flat surfaces. Use the spike for soft ground, grass, and sand. To extend the spike, rotate the rubber foot counterclockwise. Turn the foot clockwise to retract the spike.
PAGE 7
SPECIFICATIONS CTM2400 CTM2500 CTM2600 ATM2600 1/4-20 male, 3/8-16 male 1/4-20 male, 3/8-16 male 1/4-20 male, 3/8-16 male 1/4-20 male, 3/8-16 male Twist lock Twist lock Twist lock Twist lock 4 5 6 6 22 lb. (10 kg) 26 lb. (11.8 kg) 26 lb. (11.8 kg) 26 lb. (11.8 kg) 64.5 in. (164 cm) 64.7 in. (164.3 cm) 64.7 in. (164.3 cm) (46.5 cm) 17.3 in. (43.9 cm) 16.7 in. (42.4 cm) 16.7 in. (42.4 cm) Materials Carbon fiber Carbon fiber Carbon fiber Aluminum Weight 0.85 lb. (36 g) 1 lb.