Oben AC-2300L, CC-2300L & 2400L Series User Manual

7
To change a leg’s angle, pull the
adjustment lock outward and set
the angle of the leg. Push the lock
in to lock the leg at that angle.
The sliding center column can
be used to adjust the height of
the camera. Fully extending the
center column after the legs have
been fully extended will place the
camera at the highest position
possible with this tripod. For low-
angle shots or to use other camera
positions not available using the
traditional tripod conguration,
the center column can be placed
horizontally.
AdJuSt thE cEntEr coLumn
Turn the center column locking
knob counterclockwise, adjust
the center column to the desired
height, and lock it in place by
turning the center column locking
knob clockwise. Ensure that the
knob is secure, but do not over-
tighten it to avoid damaging the
tripod.
Note: Extending the center column
may leave the tripod less stable.
4. Center Column Adjustment
oPErAtIon
callouts
leg angle adj
center clm adj
attaching head
low angle adj
180°