Oben AC-2300L, CC-2300L & 2400L Series User Manual
6
1. Retractable Spiked Feet
2. Leg Length Adjustment
3. Leg Angle Adjustment
A spike is built into each of the
tripod’s rubber feet. The rubber
non-skid feet are for use indoors
or on flat surfaces, while the
spikes are for soft ground, grass,
sand, and uneven terrain. To
extend the spike, rotate the
rubber pad at the bottom of the
foot clockwise until the spike
is fully exposed. Turn the foot
counterclockwise to retract the
spike into the rubber foot.
For stable support when
shooting on uneven terrain,
each leg of your tripod can be
individually set at a preset angle
of 24˚, 55˚ or 80˚.
A flip-lock design allows you
to quickly change the height of
each telescopic tripod leg. To
adjust the height of a leg: push
the lever open, position the leg
at the desired height, and push
the lever closed to lock the leg
in place. Each flip lock includes
an Allen screw that can be
tightened or loosened using an
Allen wrench.
oPErAtIon