PD-117 3-Way Pan/Tilt Head You’re on steady ground™ 1
Introduction TABLE OF CONTENTS Thank You for choosing Oben! This sturdy Oben PD-117 3-Way Pan and Tilt Head offers precise, smooth operation, with independent control of each of the three axes. The PD-117 has a durable and handsome lowreflectance powder-coated finish and ergonomic rubber handle grips for tilt-and-pan operation. Integrated bubble levels along each of the three axes ensure accurate, precise placement of the camera.
KEY FEATURES OPERATION 1. Attach Handles to Head H A B F F F You must attach the control handles to the head before using it. There are two handles, as well as a Pan Locking Knob (which is pre-installed). The two handles to be installed are identical and either handle can be installed in either handle position on the head. C 2.
OPERATION OPERATION Turn the knob counter-clockwise to unlock and clockwise to lock it. After positioning the head, make sure to securely tighten the knob. 4. Mount Quick-Release Plate Mount the quick-release plate to the threaded hole on the base of your camera. The plate utilizes a 1/4″-20 screw that will fit most cameras. Align the mounting screw with the mounting socket on your camera and tighten the screw securely.
www.obensupports.
