AC Series User Manual

8
oPErAtIon
5. Low-Angle Setup (continued)
2. Turn the center column locking
knob counterclockwise to
unlock the center column.
Remove the center column
from the tripod and remove the
center column locking knob
from the center column.
3. Reverse the center column and
insert it up through the bottom
of the tripod top plate.
4.Slide the center column into
the desired position. Turn the
center column locking knob
clockwise to lock it at the
desired height.
SPLIt thE cEntEr coLumn
1. Remove the weight hook from
the bottom of the column by
turning it counterclockwise and
pulling it out of the column. .
2. Turn the center column locking
knob counterclockwise to
unlock the center column.
Remove the center column from
the tripod.
3. Use the smallest included Allen
wrench to loosen the Allen
screw located near the top of the
center column. When the Allen
screw is loosened, unscrew the
top part of the center column
and remove it from the column.