AC Series User Manual

7
oPErAtIonoPErAtIon
There are two ways to adjust
the tripod for low-angle shots.
rEVErSE thE cEntEr coLumn
1. Remove the built-in weight
hook from the bottom of
the column by turning
it counterclockwise and
pulling it out of the column.
4. Center Column Adjustment
5. Low-Angle Setup
The sliding center column can
be used to adjust the height of
the camera. Fully extending
the center column after the legs
have been fully extended will
place the camera at the highest
position possible with this
tripod.
AdjuSt thE cEntEr coLumn
Turn the center column locking
knob counterclockwise, adjust
the center column to the desired
height, and lock it in place by
turning the center column locking
knob clockwise. Ensure that the
knob is secure, but do not over-
tighten it to avoid damaging the
tripod.