User's Manual

Using NIRSIT-Lite Kids Software
29
No.
Description
 Measure Start: Start measurement of HbO2 Or HbR Or HbT
 Measure Finish: Finish the measurement and save data
 Y Axis Set: Set Y axis of Time Series graph
 Baseline: Set the baseline of initial MBLL value to the current value.
4
Save the task start point by selecting the TASK A START button. Save the task end
point by selecting the TASK A END button. The same applies to the Task B START
and END button.
NOTE
You can manually save the task start point and end
point in the NIRSIT database. It is possible to record
two tasks (tasks A and B) simultaneously.
5
 HbO2: Color-map changes in HbO2 level
 HbR: Color-map changes in HbR level
 HbT: Color-map changes in the sum of HbO2 and HbR levels
6
Reset the position of the 3D brain image.
7
3D brain image
 RIGHT denotes Right Hemisphere.
 LEFT denotes Left Hemisphere.
 Measured signal is shown in mM, ranging from -0.010mM to 0.010mM.
NOTE
Measured signals are represented in multiple colors
on 3D brain image, and each color indicates different
states:
 White: Initial state of the brain (Baseline)
 White < Yellow < Red: Increase in HbO2 level
 White > Light Blue > Blue: Decrease in HbO2
8
 Threshold value: Update HbO2, HbR, HbT Display Color Map with changed value
9
Time series image
Time Series Mode shows HbO2 and HbR changes in a graph format in real-time on
a channel by channel basis.