How to Guide
FAQs
Copper Installation
Q What is the shelf life of Oatey uxes?
A 2 years from date of manufacture.
Q Do you need to stir Oatey uxes before applying it to the joints?
A Yes. It is very important to stir upwards from the container bottom to insure any salts which have settled
are mixed evenly into the ux. This should be done before the start of each project.
Q How can excess ux be removed from the exterior of pipe after the joint has been soldered?
A After the soldering process is completed while the pipe is still warm, you can wipe the joint with a dry
clean rag to remove the excess ux. If the pipe has cooled or uids are passing through it, you can use
mild detergents (i.e. Dawn dish detergent) to wash off the excess ux.
Q What is the diameter of bulk solder?
A Half pound and one pound sizes range from .084 to .117 in diameter, and ve pound sizes are always
.117 in diameter.
Q What is the diameter of carded solder?
A All carded solders range from .084 to .117 in diameter with the exception of 95/5 which is .081 in diameter.