Specification
Job Name Item #
Location
Engineer Contractor
PO # Tag
Representative
EASY TAP
®
CLOSET FLANGE
TECHNICAL SPECIFICATION
SPECIFICATIONS
Oatey Easy Tap Closet Flanges shall be installed where required in
drainage systems. The ange shall have a test cap that knockouts
easily and cleanly, eliminating the possibility of falling down the DWV
pipe. Closet anges with plastic rings shall be fastened to the oor and
installed with four mounting slots, four countersunk screw holes, and four
striking pads for easy test cap removal. Metal and Stainless Steel rings
shall be fastened to the oor and provide six countersunk screw holes,
two tabs and two mounting slots that include a bolt slot shelf to stabilize
the closet bolts to ange ring. Flanges shall install over 3” Schedule 40
DWV pipe or inside 4” Schedule 40 DWV pipe. Closet ange shall hold up
to 30 feet of head pressure and be UPC listed.
APPROVALS & LISTINGS
ABS Compliance Listing
IAPMO Listing File # 3905
Markings: UPC, cUPC, ASTM D 2661
PVC Compliance Listing
IAPMO Listing File #2896
Markings: UPC, cUPC, ASTM D 2665
PHYSICAL PROPERTIES
ABS Plastic Black
PVC Plastic White
Stainless Steel Ring 400 Series
Metal Ring Powder-coated 16 Gauge Steel
DIMENSIONS
3" X 4" TESTABLE CLOSET FLANGE
[A]: Overall Height 2.56" [E]: Hub O.D. 3.96"
[B]:
Overall
Diameter
7.0 0 " [F]:
Flange Ring
Thickness
0.45"
[C]: Screw Centers 6.00" [G]: Hub Depth 2.11"
[D]: Hub I.D. 3.52" [H]: Test Cap Diameter 3.20"
3" X 4" TESTABLE CLOSET FLANGE WITH METAL OR STAINLESS
STEEL RING
[A]: Overall Height 2.53" [E]: Hub O.D. 3.96"
[B]:
Overall
Diameter
7.01" [F]:
Flange Ring
Thickness
0.44"
[C]: Screw Centers 6.00" [G]: Hub Depth 2.11"
[D]: Hub I.D. 3.52" [H]: Test Cap Diameter 3.20"
Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | P: 1.800.321.9532 | Oatey.com
Access BIM/Revit content through www.oatey.com
LCS1299 10/20
Plastic Ring
Metal or Stainless
Steel Ring
3" X 4" TESTABLE CLOSET FLANGE DIMENSIONS
A
G
B
C
F
D
E
H
REVISIONS
ECN
REV.
DESCRIPTION
DATE
APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
SHEET 1 OF 1
THIRD ANGLE PROJECTION
DRAWING INTERPRETATION
USING ASME Y14.5M
REV.
CRITICAL DIMENSION
FOR INSPECTION
Easy Tap Closet
Flange without Ring
ALL DRAWINGS ARE THE PROPERTY OF
WITHOUT OFFICIAL WRITTEN PERMISSION FROM
AND ARE TO BE PROMPTLY RETURNED
UPON REQUEST.
AND SHALL NOT BE REPRODUCED OR DISTRIBUTED
MOLD NO.
----
APPROVALS
PART NO.
.XXX
.005
FRACTIONS DECIMALS ANGLES
TOLERANCES ARE:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES.
1/4 .XX
.020
1
SHEET 1 OF 1
CHECKED
DRAWN
DATE
TITLE
DO NOT SCALE DRAWING
MATERIAL
B
SIZE
SCALE:1:2
A
G
D
E
C
H
F
A
B
REVISIONS
ECN
REV.
DESCRIPTION
DATE
APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
SHEET 1 OF 1
THIRD ANGLE PROJECTION
DRAWING INTERPRETATION
USING ASME Y14.5M
REV.
CRITICAL DIMENSION
FOR INSPECTION
Easy Tap Closet
Flange with Ring
ALL DRAWINGS ARE THE PROPERTY OF
WITHOUT OFFICIAL WRITTEN PERMISSION FROM
AND ARE TO BE PROMPTLY RETURNED
UPON REQUEST.
AND SHALL NOT BE REPRODUCED OR DISTRIBUTED
MOLD NO.
N.A.
AS SHOWN
APPROVALS
PART NO.
.XXX
.005
FRACTIONS DECIMALS ANGLES
TOLERANCES ARE:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES.
1/4 .XX
.020
1
SHEET 1 OF 1
CHECKED
DRAWN
DATE
TITLE
DO NOT SCALE DRAWING
MATERIAL
B
SIZE
A
G
B
C
F
D
E
H
REVISIONS
ECN
REV.
DESCRIPTION
DATE
APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
SHEET 1 OF 1
THIRD ANGLE PROJECTION
DRAWING INTERPRETATION
USING ASME Y14.5M
REV.
CRITICAL DIMENSION
FOR INSPECTION
Easy Tap Closet
Flange without Ring
ALL DRAWINGS ARE THE PROPERTY OF
WITHOUT OFFICIAL WRITTEN PERMISSION FROM
AND ARE TO BE PROMPTLY RETURNED
UPON REQUEST.
AND SHALL NOT BE REPRODUCED OR DISTRIBUTED
MOLD NO.
----
APPROVALS
PART NO.
.XXX
.005
FRACTIONS DECIMALS ANGLES
TOLERANCES ARE:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES.
1/4 .XX
.020
1
SHEET 1 OF 1
CHECKED
DRAWN
DATE
TITLE
DO NOT SCALE DRAWING
MATERIAL
B
SIZE
SCALE:1:2
A
Uniform Plumbing Code (UPC
®
)
CSA Approved