Submittal Sheet

Job Name Item #
Location
Engineer Contractor
PO # Tag
Representative
MODA
™
TOILET/DISHWASHER
OUTLET BOX
TECHNICAL SPECIFICATION
SPECIFICATIONS
Oatey MODA™ toilet/dishwasher supply boxes shall be used in residential
or commercial applications requiring a supply valve recessed in the wall. The
MODA™ toilet box assembly contains a 3/8” OD compression valve pre-
installed in a PVC box, with inter-locking wing anges on each side. The wing
anges shall allow installation on a single stud, or between two studs using
the included side brackets. No additional components shall be required for a
between stud installation. Valves shall be a two-piece design, permitting eld
replacement, and shall be secured with a stainless steel retention clip. Valves
are available with or without water hammer arrestors and shall be installed
upright or inverted. The assembly shall include an emergency drain port for
protection from supply hose leaks.
Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | P: 1.800.321.9532 | Oatey.com
DIMENSIONS
Access BIM/Revit content through www.oatey.com
[A]: Box Width 8.00" [E]: Bracket Length 8.00"
[B]: Box Depth 3.38" [F]: Faceplate Width 6.00"
[C]: Box Height 4.85" [G]: Faceplate Height 6.45"
[D]: Bracket Width 4.00" [H]: Faceplate Depth 1.25"
Accessory Components Included:
Side Brackets (2) Faceplates (1)
Sticker Cover
(For Debris Protection)
Faceplate Insert (1)
APPROVALS & LISTINGS
Valves
ASME A112.18.1 / CSA B125.1
NSF / ANSI 61 & 372
Water Hammer
Arrestors
ASSE 1010
Boxes IAPMO-Listed, PS-54
FEATURES & MATERIALS
Outlet Box
& Brackets
PVC
Valve Body Forged Brass C46500 No Lead (Chrome Plated)
Valve
Retention Clip
Stainless Steel
Valve O-Ring NSF/FDA Approved EPDM (2)
Temperature
Rating (Valve)
250° F / 121° C
Max Testing
Pressure
150 psi (Air) / 250 psi (Water)
LCS1289C 11/21