Instructions

ManualsBrandsOatey ManualsHammer ArrestorOatey 34440 Compression Tee AA Hammer Arrestor

INSTRUCTION GUIDE

Turn off the water supply to the valve.

Cut water line and place supplied compression nut and

ferrule ring on both ends of the pipe.

Insert both ends of the pipe into the openings of the

Quiet Pipes

Hammer Arrestor and secure compression

nuts to the hammer arrestor using wrenches. Use one

wrench to stabilize the hammer arrestor and prevent

movement while using another to tighten compression nuts.

Turn the water on and check for leaks.

Oatey.com

©2021 Oatey SCS. All Rights Reserved. This information is based on data believed to be reliable but Oatey makes no warranties, express or implied, as to its accuracy and assumes no liability arising out

of its use. The data listed falls within the normal range of product properties but should not be used to establish specication limits or used alone as the basis of design. Oatey’s liability to purchasers is

expressly limited to the terms and conditions of sale. Oatey is trademark of Oatey Co. All other trademarks can be found www.Oatey.com.

QUIET PIPES

HAMMER ARRESTOR

Summary of content (1 pages)

PAGE 1
INSTRUCTION GUIDE QUIET PIPES® HAMMER ARRESTOR 1 Turn off the water supply to the valve. 2 Cut water line and place supplied compression nut and ferrule ring on both ends of the pipe. 3 Insert both ends of the pipe into the openings of the Quiet Pipes® Hammer Arrestor and secure compression nuts to the hammer arrestor using wrenches. Use one wrench to stabilize the hammer arrestor and prevent movement while using another to tighten compression nuts. 4 Turn the water on and check for leaks.