Technical Specifications

ManualsBrandsOatey ManualsCleaners & PrimersFusion PVC Cement - 4 oz

Technical Specification

Fusion Single Step

Clear Self-Priming Medium PVC Cement

Oatey Co.

20600 Emerald Parkway

Cleveland, OH 44135

Phone: 1-800-321-9532

Phone: 1-800-321-9535

Visit www.oatey.com for Update

Page 1 of 3

Description

• Medium-bodied, single step, self-priming cement.

Low Odor.

• No primer needed on non-pressure DWV

applications, where local code permits.

• Low Odor.

• For use on all schedules and classes of PVC pipe

and fittings up to 4” and non-pressure applications

up to 6” with interference fit.

• Recommended application temperature 40°F to

110°F / 4°C to 43°C.

• Lo-V.O.C. Solvent Cement meets California South

Coast Air Quality Management District (SCAQMD)

1168/316A or BAAQMD Method 40.

• Meets ASTM D2564.

Listings

NSF Standard 61 for PW,

DWV and Sewer Waste

IAPMO Listed

VOC per SCAQMD 1168/316A or BAAQMD Method 40: 341 g/L

INGREDIENTS (CAS Number)

Acetone (67-64-1), Amorphous Silica (112945-52-5), Cyclohexanone (108-94-4), Methyl Ethyl Ketone

(78-93-3), PVC Resin (9002-86-2)

MSDS Number: 1127

Properties:

CHEMICAL

PHYSICAL

Appearance

Viscosity

Density

Shelf Life

Clear Liquid

Min. 3000 cps @73° F ± 2° F

7.9 ± 0.2 lbs/gallon

3 years from manufacture date

Lap Shear Strength

2 hours

16 hours

72 hours

(min. ASTM Standards)

250 psi

500 psi

900 psi

Product Number

Size

Qty

Wgt

Product Number

Size

Qty

Wgt

32192

10 oz.

14.2 lbs

Summary of content (3 pages)

PAGE 1
Technical Specification Fusion Single Step Clear Self-Priming Medium PVC Cement Description • Medium-bodied, single step, self-priming cement. Low Odor. • No primer needed on non-pressure DWV applications, where local code permits. • Low Odor. • For use on all schedules and classes of PVC pipe and fittings up to 4” and non-pressure applications up to 6” with interference fit. • Recommended application temperature 40°F to 110°F / 4°C to 43°C. • Lo-V.O.C.
PAGE 2
Technical Specification CURE CHART Fusion Single Step Clear Self-Priming Medium PVC Cement Temperature during assembly and cure period 60° to 100 °F 40° to 60 °F 0° to 40 °F Pipe Diameter 16° to 38 °C 4° to 16 °C -18° to 4 °C Up to 180 PSI 1/2" to 1 1/4" (13 to 32 mm) 15 min 20 min 60 min Up to 180 PSI 1 1/2" to 3" (40 to 80 mm) 30 min 2 hrs 4 hrs Up to 180 PSI 4" to 5" (100 to 125 mm) 2 hrs 16 hrs *** Up to 180 PSI 6" (150 mm) 8 hrs *** *** *** Please contact Oatey Technical Services for cure time inform
PAGE 3
Technical Specification Fusion Single Step Clear Self-Priming Medium PVC Cement Directions for Use Store and use at temperatures between 40°F and 110°F. At temperatures outside of this range, special care must be taken to prepare good joints and prevent exposure to solvents. Stir or shake before using; if jelly-like, don’t use. Do not thin. 1. Cut pipe ends square, chamfer and clean pipe ends. 2. Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting.