Dimensions Guide

ManualsBrandsOatey ManualsPipe CementsBlue Lava 32 oz. Medium Blue PVC Pipe Cement

Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | 800.203.1155 | Oatey.com

Oatey Co. is part of the Oatey family of companies

Job Name Item #

Location

Engineer Contractor

PO # Tag

Representative

HOT MEDIUM BLUE

LAVA PVC CEMENT

TECHNICAL SPECIFICATION

SPECIFICATIONS

• Extremely fast setting thick formula clings to pipe in wet

and underwater applications.

• Preferred formula for emergency, repair, and cut in work.

• Medium body blue cement for use on all schedules and classes

of PVC pipe and ﬁttings up to 6" diameter with interference ﬁt.

• No primer needed where local code permits.

• Lo- VOC Solvent Cement meets California South Coast Aire Quality

Air Quality Management District ( SCAQMMD ) 1168/316A or

BAAQMD Method 40 and various environmental requirements.

APPLICATION / USES

• Recommended for potable water, sewer, and DWV applications.

• Recommended application temperature 40°F to 110°F / 4°C to 43°C.

PROPERTIES

8/19

ASTM D2564

PRODUCT NUMBER SIZE DESCRIPTION CTN. QTY

32160 4 oz.

Hot Medium Blue Lava

PVC Cement

32161 8 oz.

Hot Medium Blue Lava

PVC Cement

32162 16 oz.

Hot Medium Blue Lava

PVC Cement

32163 32 oz.

Hot Medium Blue Lava

PVC Cement

32164 Gallon

Hot Medium Blue Lava

PVC Cement

VOC

Maximum VOC per SCAQMD 1168/316A or

BAAQMD Method 40: 510 g/L

CHEMICAL PROPERTIES

Appearance Blue Liquid

Viscosity Min. 1500° cps @ 73° F ± 2° F

Shelf Life 3 Years from Mfg. Date

SET TIME / CURE TIME

30° F to 50° F 4 – 5 minutes

50° F to 70° F 3 – 4 minutes

70° F to 90° F 1 – 2 minutes

Summary of content (2 pages)

PAGE 1
HOT MEDIUM BLUE LAVA PVC CEMENT TECHNICAL SPECIFICATION Job Name Item # Location Engineer Contractor PO # Tag Representative SPECIFICATIONS • Extremely fast setting thick formula clings to pipe in wet and underwater applications. • Preferred formula for emergency, repair, and cut in work. • Medium body blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. • No primer needed where local code permits.
PAGE 2
HOT MEDIUM BLUE LAVA PVC CEMENT TECHNICAL SPECIFICATION DIRECTIONS PRECAUTIONS Store and use at temperatures between 40°F and 110°F. • At temperatures outside of this range, special care must be taken to make good joints. Stir or shake before using; if jelly-like, don’t use. Do not thin Read all information carefully before using this product. 1. Pipe ends must be cut square, deburred and chamfered. 2. Check interference fit of pipe and fitting.