Submittal Sheet
Visit www.oatey.com for updates
TECHNICAL SPECIFICATION: Oatey LiquiLock Gel will solidify water in the toilet bowl providing a clean, fast and easy
method for removal of the toilet. Quick acting LiquiLock Gel formula will solidify residual water in the toilet bowl within 4-5
minutes. The toilet bowl water will remain in a gel form during removal period and will dissolve when additional water is
added.
LIQUILOCK™ BY OATEY GEL
PRECAUTIONS
Read all cautions and directions carefully before using this
product.
May be harmful if swallowed. May cause irritation. Avoid
breathing vapors or dust. Use with adequate ventilation.
Avoid contact with eyes, skin on clothing. Wash thoroughly
after handling.
Material may be slippery when wet. Handle with care.
FIRST AID:
SKIN: Remove contaminated clothing. Wash exposed
area with soap and water. If irritation persists, seek
medical attention. EYES: Flush with plenty of water for at
least 15 minutes, lifting eyelids occasionally. If irritation
persists, seek medical attention. INHALATION: Remove
to fresh air. If not breathing, give artificial respiration.
INGESTION: If swallowed, induce vomiting immediately
after giving two glasses of water. KEEP OUT OF REACH
OF CHILDREN.
Refer to material safety data sheet for more information.
For emergency first aid help, call 1-877-740-5015.
INGREDIENTS (CAS Number)
Sodium Polyacrylate Crosslinked (9003-04-7)
PRODUCT NUMBER DESCRIPTION PACK CARTON WEIGHT
31416 .6 oz. LiquiLock Gel – Display 24 1.5 lbs.
31417 .6 oz. LiquiLock Gel – Bulk 50 3 lbs.
4/2010
PHYSICAL/CHEMICAL PROPERTIES
Appearance White Powder
DIRECTIONS FOR USE
1. Turn off water supply line to toilet. 2. Flush toilet
and hold down handle. 3. Empty entire contents of
non-toxic LiquiLock into remaining water. For 3.5 gpf
(gallon per flush) or larger toilets, use 2 packets of
LiquiLock simultaneously into the bowl. Let LiquiLock
absorb for a minimum of 4 minutes allowing water to
solidify. 4. Keeping toilet level, carefully remove as
needed.
REINSTALL TOILET
1. Reconnect and turn on water supply line to the
toilet. 2. Allow toilet tank to fill with water and flush
toilet. Water may fill toilet bowl. 3. Let LiquiLock sit
for a few minutes until water liquefies and flushes.
COMMON APPLICATIONS
LiquiLock by Oatey is a safe, non-toxic formulation
designed to solidify water in the toilet bowl during removal
of toilet from floor. Once the toilet is reinstalled, the gel
re-liquefies and can be flushed down the drain.
Consult Oatey Technical Department for applications not
specifically referenced above.