Specification

US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Value
Type
Form
Components
15 mg/m3 Total dust.
PEL 15 mg/m3 Total dust.Titanium dioxide (CAS
13463-67-7)
US. OSHA Table Z-3 (29 CFR 1910.1000)
Value
Type
Form
Components
TWA 0.3 mg/m3 Total dust.Crystalline silica (Quartz)
(CAS 14808-60-7)
0.1 mg/m3 Respirable.
US. ACGIH Threshold Limit Values
Value
Type
Form
Components
TWA 10 mg/m3Cellulose (CAS 9004-34-6)
TWA 0.025 mg/m3 Respirable fraction.Crystalline silica (Quartz)
(CAS 14808-60-7)
TWA 5 mg/m3 Inhalable fraction.Distillates (petroleum),
hydrotreated heavy
naphthenic (CAS
64742-52-5)
TWA 2 mg/m3 Respirable fraction.Kaolin (CAS 1332-58-7)
TWA 10 mg/m3Titanium dioxide (CAS
13463-67-7)
US. NIOSH: Pocket Guide to Chemical Hazards
Value
Type
Form
Components
TWA 5 mg/m3 Respirable.Cellulose (CAS 9004-34-6)
10 mg/m3 Total
TWA 0.05 mg/m3 Respirable dust.Crystalline silica (Quartz)
(CAS 14808-60-7)
STEL 10 mg/m3 Mist.Distillates (petroleum),
hydrotreated heavy
naphthenic (CAS
64742-52-5)
TWA 5 mg/m3 Mist.
TWA 5 mg/m3 Respirable.Kaolin (CAS 1332-58-7)
10 mg/m3 Total
Biological limit values
No biological exposure limits noted for the ingredient(s).
Appropriate engineering
controls
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles).
Skin protection
Hand protection
Wear appropriate chemical resistant gloves.
Other
Wear suitable protective clothing.
Respiratory protection
Use a particulate filter respirator for particulate concentrations exceeding the Occupational
Exposure Limit.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene
considerations
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Great Blue Pipe Joint Compound SDS US
923671 Version #: 01 Revision date: - Issue date: 05-February-2015
3 / 7