Dimensions Guide

ManualsBrandsOatey ManualsPipe Cements, Primers Cleaners16-fl oz PVC Cement

Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | 800.203.1155 | Oatey.com

Oatey Co. is part of the Oatey family of companies

Job Name Item #

Location

Engineer Contractor

PO # Tag

Representative

PVC ALL WEATHER

CLEAR CEMENT

TECHNICAL SPECIFICATION

8/19

VOC

Maximum VOC per SCAQMD 1168/316A or

BAAQMD Method 40: 510 g/L

CHEMICAL PROPERTIES

Appearance Clear Liquid

Viscosity Min. 500° cps @ 73° F ± 2° F

Density 7.89 ± 0.2 lbs/gallon

Shelf Life 3 Years from Mfg. Date

SET TIME / CURE TIME

30° F to 50° F 3 – 4 minutes

50° F to 70° F 2 – 3 minutes

70° F to 90° F 1 – 2 minutes

PRODUCT NUMBER SIZE DESCRIPTION CTN. QTY

31132 16 oz.

PVC All Weather

Clear Cement

31133 32 oz.

PVC All Weather

Clear Cement

31135 Gallon

PVC All Weather

Clear Cement - Wide

Mouth Can

SPECIFICATIONS

• Medium-bodied clear cement for use on all schedules and classes

of PVC pipe and ﬁttings up to 6" diameter with interference ﬁt.

• Lo-V.O.C. Solvent Cement meets California South Coast Air Quality

Management District (SCAQMD) 1168/316A or BAAQMD Method

40 and various environmental requirements.

• No primer needed on non-pressure DWV, where local codes permit.

APPLICATION / USES

• Recommended for use on potable water, drain, waste, and

vent systems.

• Recommended application temperature - 15°F to 110°F / -26°C

to 43°C.

PROPERTIES

Compliant with LEED Requirements. Solvent cements may be speciﬁed

under the LEED v4 EQ for Low-Emitting Materials to obtain points

ASTM Standard D2564, NSF Standard 61 for PW,

DWV and Sewer Waste, IAPMO Listed

Summary of content (2 pages)

PAGE 1
PVC ALL WEATHER CLEAR CEMENT TECHNICAL SPECIFICATION Job Name Item # Location Engineer Contractor PO # Tag Representative SPECIFICATIONS • Medium-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
PAGE 2
PVC ALL WEATHER CLEAR CEMENT TECHNICAL SPECIFICATION DIRECTIONS PRECAUTIONS Store and use at temperatures between 40°F and 110°F. • At temperatures outside of this range, special care must be taken to make good joints. Stir or shake before using; if jelly-like, don’t use. Do not thin Read all information carefully before using this product. 1. Pipe ends must be cut square, deburred and chamfered. 2. Check interference fit of pipe and fitting. Pipe should easily go 1/3 to 2/3 of the way into the fitting.