Dimensions Guide

ManualsBrandsOatey ManualsPipe Cements16 oz. Gray Heavy-Duty Fast Set PVC Pipe Cement

Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | 800.203.1155 | Oatey.com

Oatey Co. is part of the Oatey family of companies

Job Name Item #

Location

Engineer Contractor

PO # Tag

Representative

PVC HEAVY DUTY

GRAY FAST SET CEMENT

TECHNICAL SPECIFICATION

8/19

VOC

Maximum VOC per SCAQMD 1168/316A or

BAAQMD Method 40: 510 g/L

CHEMICAL PROPERTIES

Appearance Gray Liquid

Viscosity Min. 1600° cps @ 73° F ± 2° F

Density 7.86 ± 0.2 lbs/gallon

Shelf Life 3 Years from Mfg. Date

SET TIME / CURE TIME

30° F to 50° F 3 – 4 minutes

50° F to 70° F 1 – ½ – 3 minutes

70° F to 90° F 1 – ½ – 2 minutes

PRODUCT NUMBER SIZE DESCRIPTION CTN. QTY

31121 16 oz.

PVC Heavy Duty Gray

Fast Set Cement

31122 32 oz.

PVC Heavy Duty Gray

Fast Set Cement

31123 Gallon

PVC Heavy Duty Gray

Fast Set Cement - Wide

Mouth Can

SPECIFICATIONS

• Very Heavy-bodied medium setting gray cement for use on all

schedules and classes PVC pipe and ﬁttings up to 18" diameter

with interference ﬁt.

• Lo-V.O.C. Solvent Cement meets California South Coast Air Quality

Management District (SCAQMD) 1168/316A or BAAQMD Method

40 and various environmental requirements.

• Formulated for a faster cure time so you can pressurize

a system faster.

• Builds up for large diameter installations.

• Fills gaps in large diameter pipe and loose ﬁtting joints.

APPLICATION / USES

• Recommended for potable water, pressure pipe, conduit and DWV.

PROPERTIES

Compliant with LEED Requirements. Solvent cements may be speciﬁed

under the LEED v4 EQ for Low-Emitting Materials to obtain points

ASTM Standard D2564, NSF Standard 61 for PW,

DWV and Sewer Waste, IAPMO Listed

Summary of content (2 pages)

PAGE 1
PVC HEAVY DUTY GRAY FAST SET CEMENT TECHNICAL SPECIFICATION Job Name Item # Location Engineer Contractor PO # Tag Representative SPECIFICATIONS • Very Heavy-bodied medium setting gray cement for use on all schedules and classes PVC pipe and fittings up to 18" diameter with interference fit. • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
PAGE 2
PVC HEAVY DUTY GRAY FAST SET CEMENT TECHNICAL SPECIFICATION DIRECTIONS PRECAUTIONS Store and use at temperatures between 40°F and 110°F. • At temperatures outside of this range, special care must be taken to make good joints. Stir or shake before using; if jelly-like, don’t use. Do not thin Read all information carefully before using this product. 1. Pipe ends must be cut square, deburred and chamfered. 2. Check interference fit of pipe and fitting.