Technical Specifications

ManualsBrandsOatey ManualsCleaners & PrimersRegular PVC Pipe Cement - 32 oz.

Technical Specification

Regular Clear PVC Cement

Oatey Co.

4700 West 160 th St.

Cleveland, OH 44135

Phone: 1-800-321-9532

Phone: 1-800-321-9535

Visit www.oatey.com for Update

Page 1 of 3

Description

 Regular-Bodied Clear cement for use on all

schedules and classes of PVC pipe and fittings

up to 4” for Sch. 40 and up to 2” for Sch. 80.

 Lo-V.O.C. Solvent Cement meets California

South Coast Air Quality Management District

(SCAQMD) 1168/316A or BAAQMD Method 40

and various environmental requirements.

 Recommended for potable water, pressure

pipe, conduit and DWV.

 Recommended application temperature 40°F to

110°F / 4°C to 43°C.

 Meets ASTM D-2564.

Listings

NSF Standard 61 for PW,

DWV and Sewer Waste

IAPMO Listed

Maximum VOC per SCAQMD 1168/316A or BAAQMD Method 40: 510 g/L

INGREDIENTS (CAS Number)

Acetone (67-64-1), Amorphous Silica (112945-52-5), Cyclohexanone (108-94-4), Methyl Ethyl Ketone

(78-93-3), PVC Resin (9002-86-2), Tetrahydrofuran (109-99-9)

MSDS Number: 1100E

Product Number

Size

Qty

Wgt

Product Number

Size

Qty

Wgt

31012

4 oz.

9 lbs.

310123

4 oz.

8 lbs.

31013

8 oz.

15 lbs.

310133

8 oz.

15 lbs.

31014

16 oz.

28 lbs.

310143

16 oz.

28 lbs.

31015

32 oz.

27 lbs.

310153

32 oz.

27 lbs.

31016

Gallon

50 lbs.

Summary of content (3 pages)

PAGE 1
Regular Clear PVC Cement Technical Specification Description      Regular-Bodied Clear cement for use on all schedules and classes of PVC pipe and fittings up to 4” for Sch. 40 and up to 2” for Sch. 80. Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature 40°F to 110°F / 4°C to 43°C.
PAGE 2
Technical Specification Appearance Viscosity Density Shelf Life Regular Clear PVC Cement CHEMICAL PROPERTIES Clear Liquid Min. 90 cps @73° F ± 2° F 7.47 ± 0.2 lbs/gallon 3 years from manufacture date PHYSICAL PROPERTIES Lap Shear Strength (min. ASTM Standards) 2 hours 250 psi 16 hours 500 psi 72 hours 900 psi Set Up Time 30° F to 50° F 6 – 7 minutes 50° F to 70° F 4 – 5 minutes 70° F to 90° F 1 – 3 minutes Precautions Read all information carefully before using this product.
PAGE 3
Technical Specification Regular Clear PVC Cement Directions for Use Store and use at temperatures between 40°F and 110°F. At temperatures outside of this range, special care must be taken to prepare good joints and prevent exposure to solvents. Stir or shake before using; if jelly-like, don’t use. Do not thin. 1. Cut pipe ends square, chamfer and clean pipe ends. 2. Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms, it should be snug. 3.