Dimensions Guide

ManualsBrandsOatey ManualsPipe Cements, Primers Cleaners31008L

Technical Specification

Heavy Duty Clear PVC Cement

Oatey Co.

4700 West 160 th St.

Cleveland, OH 44135

Phone: 1-800-321-9532

Phone: 1-800-321-9535

Visit www.oatey.com for Update

Page 1 of 3

Description

 Heavy Bodied Clear cement for use on all

schedules and classes of PVC pipe and

fittings up to 12” with interference fit, 18”

for DWV applications.

 Lo VOC Solvent Cement that meets

California South Coast Air Quality

Management Districts (SCAQMD) 1168/316A

or BAAQMD Method 40 requirements.

 Thick Formula fills gaps in large diameter

pipe and loose fitting joints.

 Recommended for potable water, pressure

pipe, conduit and DWV applications

 Meets ASTM Standard D2564

Listings

NSF Standard 61 for

PW, DWV and Sewer

Waste

IAPMO Listed

Maximum VOC per SCAQMD 1168/316A or BAAQMD Method 40: 510 g/L

INGREDIENTS (CAS Number)

Acetone (67-64-1), Amorphous Silica (112945-52-5), Cyclohexanone (108-94-4), Methyl Ethyl Ketone

(78-93-3), PVC Resin (9002-86-2), Tetrahydrofuran (109-99-9)

MSDS Number: 1102E

Product

Number

Size

Qty

Wgt

Product Number

Size

Qty

Wgt

30850

4 oz.

9 lbs.

31011

Gallon

54 lbs.

30863

8 oz.

16 lbs.

308633

8 oz.

16 lbs.

30876

16 oz.

29 lbs.

308763

16 oz.

29 lbs.

31008

32 oz.

29 lbs.

310083

32 oz.

29 lbs..

Summary of content (3 pages)

PAGE 1
Heavy Duty Clear PVC Cement Technical Specification Description      Heavy Bodied Clear cement for use on all schedules and classes of PVC pipe and fittings up to 12” with interference fit, 18” for DWV applications. Lo VOC Solvent Cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements. Thick Formula fills gaps in large diameter pipe and loose fitting joints.
PAGE 2
Technical Specification Heavy Duty Clear PVC Cement CHEMICAL PROPERTIES Appearance Clear Liquid Viscosity Min. 1600 cps @73° F ± Density 2° F Shelf Life 7.86 ± 0.2 lbs/gallon 3 Years from Mfg. Date PHYSICAL PROPERTIES Lap Shear Strength (min. ASTM Standards) 2 hours 250 psi 16 hours 500 psi 72 hours 900 psi Set Up Time 30° F to 50° F 4 – 5 minutes 50° F to 70° F 2 – 3 minutes 70° F to 90° F 1 – 2 minutes Precautions Read all information carefully before using this product.
PAGE 3
Technical Specification Heavy Duty Clear PVC Cement Directions for Use Store and use at temperatures between 40°F and 110°F. At temperatures outside of this range, special care must be taken to prepare good joints and prevent exposure to solvents. Stir or shake before using; if jelly-like, don’t use. Do not thin. 1. Cut pipe ends square, chamfer and clean pipe ends. 2. Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms, it should be snug. 3.