Technical Specifications

ManualsBrandsOatey ManualsCleaners & PrimersMedium ABS Pipe Cement - 4 oz.

Technical Specification

Medium Black ABS

Solvent Cement

Oatey Co.

4700 West 160 th St.

Cleveland, OH 44135

Phone: 1-800-321-9532

Phone: 1-800-321-9535

Visit www.oatey.com for Update

Page 1 of 3

Description

• Medium-bodied black cement for use on all

schedules and classes of ABS pipe and fittings

up to 6" diameter with interference fit.

• Lo-V.O.C. Solvent Cement meets California

South Coast Air Quality Management District

(SCAQMD) 1168/316A or BAAQMD Method

40 and various environmental requirements.

• For all non-pressure applications.

• Recommended application temperature

40°F to 110°F / 4°C to 43°C.

• Meets ASTM D2235.

Listings

NSF Standard 61 for DWV

and Sewer Waste

IAPMO Listed

Maximum VOC per SCAQMD 1168/316A or BAAQMD Method 40: 325 g/L

INGREDIENTS (CAS Number)

ABS Resin (9003-56-9), Acetone (67-64-1), Black Pigment (N/A), Methyl Ethyl Ketone (78-93-3)

MSDS Number: 1300E

Product Number

Size

Qty

Wgt

Product Number

Size

Qty

Wgt

30999

4 oz.

8 lbs.

308923

16 oz.

15 lbs.

309993

4 oz.

8 lbs.

30902

32 oz.

26 lbs.

30889

8 oz.

15 lbs.

309023

32 oz.

26 lbs.

308893

30892

8 oz.

16 oz.

15 lbs.

28 lbs.

30915

Gallon

51 lbs.

Summary of content (3 pages)

PAGE 1
Medium Black ABS Solvent Cement Technical Specification Description • Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. • For all non-pressure applications. • Recommended application temperature 40°F to 110°F / 4°C to 43°C. • Meets ASTM D2235.
PAGE 2
Medium Black ABS Solvent Cement Technical Specification CHEMICAL PROPERTIES Appearance Black Liquid Viscosity Min. 500 cps @73° F ± 2° F Density 7.42 ± 0.2 lbs/gallon Shelf Life 3 Years from Mfg. Date PHYSICAL PROPERTIES Lap Shear Strength (min. per ASTM Standards) 48 hours 800 psi Set Up Time 30° F to 50° F 50° F to 70° F 70° F to 90° F 5 – 6 minutes 3 – 4 minutes 1 – 2 minutes Precautions Read all information carefully before using this product. DANGER!: CAUSES SERIOUS EYE IRRITATION.
PAGE 3
Technical Specification Medium Black ABS Solvent Cement Directions for Use Store and use at temperatures between 40°F and 110°F. At temperatures outside of this range, special care must be taken to prepare good joints and prevent exposure to solvents. Stir or shake before using; if jelly-like, don’t use. Do not thin. 1. Cut pipe ends square, chamfer and clean pipe ends. 2. Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms, it should be snug. 3.