Technical Specifications

ManualsBrandsOatey ManualsCleaners & PrimersMedium ABS Pipe Cement - 4 oz.

Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | 800.203.1155 | Oatey.com

Oatey Co. is part of the Oatey family of companies

Job Name Item #

Location

Engineer Contractor

PO # Tag

Representative

ABS MEDIUM

BLACK CEMENT

TECHNICAL SPECIFICATION

PRODUCT NUMBER SIZE DESCRIPTION CTN. QTY

30999 4 oz.

ABS Medium

Black Cement

30889 8 oz.

ABS Medium

Black Cement

30892 16 oz.

ABS Medium

Black Cement

30902 32 oz.

ABS Medium

Black Cement

30915 Gallon

ABS Medium

Black Cement

8/19

SPECIFICATIONS

• Medium-bodied black cement for use on all schedules and classes

of ABS pipe and ﬁttings up to 6" diameter with interference ﬁt.

• Lo-V.O.C. Solvent Cement meets California South Coast Air Quality

Management District (SCAQMD) 1168/316A or BAAQMD Method

40 and various environmental requirements.

APPLICATION / USES

• For all non-pressure applications.

PROPERTIES

ASTM D2235, NSF Standard 61 for DWV and Sewer

Waste, IAPMO Listed

Compliant with LEED Requirements. Solvent cements may be speciﬁed

under the LEED v4 EQ for Low-Emitting Materials to obtain points

VOC

Maximum VOC per SCAQMD 1168/316A or

BAAQMD Method 40: 325 g/L

CHEMICAL PROPERTIES

Appearance Black Liquid

Viscosity Min. 500° cps @ 73° F ± 2° F

Density 7.42 ± 0.2 lbs/gallon

Shelf Life 3 Years from Mfg. Date

SET TIME / CURE TIME

30° F to 50° F 5 – 6 minutes

50° F to 70° F 3 – 4 minutes

70° F to 90° F 1 – 2 minutes

Summary of content (2 pages)

PAGE 1
ABS MEDIUM BLACK CEMENT TECHNICAL SPECIFICATION Job Name Item # Location Engineer Contractor PO # Tag Representative SPECIFICATIONS • Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
PAGE 2
ABS MEDIUM BLACK CEMENT TECHNICAL SPECIFICATION DIRECTIONS PRECAUTIONS Store and use at temperatures between 40°F and 110°F. • At temperatures outside of this range, special care must be taken to make good joints. Stir or shake before using; if jelly-like, don’t use. Do not thin Read all information carefully before using this product. 1. Pipe ends must be cut square, deburred and chamfered. 2. Check interference fit of pipe and fitting. Pipe should easily go 1/3 to 2/3 of the way into the fitting.