Technical Specifications

ManualsBrandsOatey ManualsCleaners & PrimersMedium Rain-R-Shine PVC Pipe Cement - 8 oz.

Technical Specification

Rain-R-Shine

Medium

Blue PVC Cement

Oatey Co.

4700 West 160 th St.

Cleveland, OH 44135

Phone: 1-800-321-9532

Phone: 1-800-321-9535

Visit www.oatey.com for Update

Page 1 of 3

Description

• Medium-bodied blue cement for use on all

schedules and classes of PVC pipe and fittings up

to 6" diameter with interference fit.

• Lo-V.O.C. Solvent Cement meets California South

Coast Air Quality Management District (SCAQMD)

1168/316A or BAAQMD Method 40 and various

environmental requirements.

• Very fast-setting "Hot" cement formulated for

wet conditions and/or quick pressurization and

fast installation.

• Recommended for pool, irrigation, potable

water, pressure pipe, conduit and DWV.

• Recommended application temperature 40°F to

110°F / 4°C to 43°C.

• No primer needed on non-pressure DWV, where

local codes permit.

• Meets ASTM D2564.

Listings

NSF Standard 61 for PW,

DWV and Sewer Waste

IAPMO Listed

Maximum VOC per SCAQMD 1168/316A or BAAQMD Method 40: 510 g/L

INGREDIENTS (CAS Number)

Acetone (67-64-1), Amorphous Silica (112945-52-5), Cyclohexanone (108-94-4), Methyl Ethyl Ketone

(78-93-3), PVC Resin (9002-86-2), Tetrahydrofuran (109-99-9)

MSDS Number: 1104E

Product Number

Size

Qty

Wgt

Product Number

Size

Qty

Wgt

30890

4 oz.

8 lbs.

308903

4 oz.

9 lbs.

30891

8 oz.

15 lbs.

308913

8 oz.

16 lbs.

30893

16 oz.

28 lbs.

908933

16 oz.

28 lbs.

30894

32 oz.

28 lbs.

308943

32 oz.

28 lbs.

30895

Gallon

50 lbs.

Summary of content (3 pages)

PAGE 1
Rain-R-Shine® Medium Blue PVC Cement Technical Specification Description • Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. • Very fast-setting "Hot" cement formulated for wet conditions and/or quick pressurization and fast installation.
PAGE 2
Rain-R-Shine® Medium Blue PVC Cement Technical Specification Appearance Viscosity Density Shelf Life CHEMICAL PROPERTIES Blue Liquid Min. 500 cps @73° F ± 2° F 7.83 ± 0.2 lbs/gallon 3 years from manufacture date PHYSICAL PROPERTIES Lap Shear Strength (min. ASTM Standards) 2 hours 250 psi 16 hours 500 psi 72 hours 900 psi Set Up Time 30° F to 50° F 4 – 5 minutes 50° F to 70° F 3 – 4 minutes 70° F to 90° F 1 – 2 minutes Precautions Read all information carefully before using this product.
PAGE 3
Technical Specification Rain-R-Shine® Medium Blue PVC Cement Directions for Use Store and use at temperatures between 40°F and 110°F. At temperatures outside of this range, special care must be taken to prepare good joints and prevent exposure to solvents. Stir or shake before using; if jelly-like, don’t use. Do not thin. 1. Cut pipe ends square, chamfer and clean pipe ends. 2. Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms, it should be snug. 3.