SDS

Oatey PVC Heavy Duty Clear or Gray Cement
920700 Version #: 03 Revision date:7-01-2022 Issue date:8-4-2014
SDS US
2 / 10
Hazard(s) not otherwise
classified (HNOC)
Supplemental information
Not applicable.
Frequent or prolonged contact may defat and dry the skin, leading to discomfort and dermatitis.
May form explosive peroxides. Contains a chemical classified by the US EPA as a suspected
possible carcinogen.
3. Composition/information on ingredients
Mixtures
Chemical name
CAS number
%
Furan, Tetrahydro-
109-99-9
30-
60
2-
Propanone
67-64-1
10-
30
Cyclohexanone
108-94-1
10-
30
Polyvinyl chloride
9002-86-2
10-
30
Methyl ethyl ketone
78-93-3
5-
10
Colloidal silicon dioxide
112945-52-5
1-
5
*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Inhalation
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON
CENTER or doctor/physician if you feel unwell.
Skin contact
Take off immediately all contaminated clothing. Wash with plenty of soap and water. If skin
irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before
reuse.
Eye contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Ingestion
Call a physician or poison control center immediately. Do not induce vomiting. If vomiting occurs,
keep head low so that stomach content doesn't get into the lungs. Aspiration may cause
pulmonary edema and pneumonitis.
Most important
symptoms/effects, acute and
delayed
Indication of immediate
medical attention and special
treatment needed
Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin irritation.
Vapors have a narcotic effect and may cause headache, fatigue, dizziness and nausea. May
cause redness and pain.
Provide general supportive measures and treat symptomatically. Thermal burns: Flush with water
immediately. While flushing, remove clothes which do not adhere to affected area. Call an
ambulance. Continue flushing during transport to hospital. In case of shortness of breath, give
oxygen. Keep victim warm. Keep victim under observation. Symptoms may be delayed.
General information
Take off all contaminated clothing immediately. IF exposed or concerned: Get medical
advice/attention. Ensure that medical personnel are aware of the material(s) involved, and take
precautions to protect themselves. Wash contaminated clothing before reuse.
5. Fire-fighting measures
Suitable extinguishing media
Alcohol resistant foam. Water fog. Dry chemical powder. Carbon dioxide (CO2).
Unsuitable extinguishing
media
Specific hazards arising from
the chemical
Special protective equipment
and precautions for firefighters
Fire fighting
equipment/instructions
Do not use water jet as an extinguisher, as this will spread the fire.
Vapors may form explosive mixtures with air. Vapors may travel considerable distance to a source
of ignition and flash back. During fire, gases hazardous to health may be formed.
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
In case of fire and/or explosion do not breathe fumes. Move containers from fire area if you can do
so without risk.
Specific methods
Use standard firefighting procedures and consider the hazards of other involved materials.
General fire hazards
Highly flammable liquid and vapor. This product contains tetrahydrofuran that may form explosive
organic peroxide when exposed to air or light or with age.