Technical Specifications

FLEXIBLE
MEDIUM CLEAR
PVC SOLVENT CEMENT
Page 1 of 2
TECHNICAL SPECIFICATION: Oatey Flexible Medium Clear PVC Solvent Cement is recommended for solvent welding
flexible PVC pipe and rigid fittings up to 6” with interference fit. Flexible Medium Clear PVC Solvent Cement is formulated to
withstand the pressure and vibrations associated with flexible tubing. Flexible Medium Clear PVC Solvent Cement can be used
for potable water, sewer and drain, waste and vent systems. This product is compliant with California South Coast Air Quality
Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound
emission levels. Note: This product is not for use in a system using or being tested by compressed air or gases .
PHYSICAL/CHEMICAL PROPERTIES
Appearance Clear Liquid
Viscosity min. 500 cps @ 73° F ± 2° F
Density 7.69 ± 0.2 lbs/gallon
Lap Shear Strength (minimum per ASTM Standards)
2 hours 250 psi
16 hours 500 psi
72 hours 900 psi
Set Up Time
30° F to 50° F 4 – 5 minutes
50° F to 70° F 3 – 4 minutes
70° F to 90° F 1 – 2 minutes
Shelf Life 3 years from manufacture date
Maximum VOC per SCAQMD 1168/316A or BAAQMD
Method 40: 510 g/L
INGREDIENTS (CAS Number)
Acetone (67-64-1)
Amorphous Silica (112945-52-5)
Cyclohexanone (108-94-1)
Dioctyl Terephthalate (6422-86-2)
Methyl Ethyl Ketone (78-93-3)
PVC Resin (9002-86-2)
Tetrahydrofuran (109-99-9)
LISTINGS
NSF Standard 61
for PW, DWV, SEWER
Meets ASTM Standard D 2564
PRODUCT NUMBER SIZE PACK CARTON WEIGHT
30875 4 oz. 12 15 lbs.
30879 32 oz. 12 28 lbs.
Visit
www.oatey.com
for updates
1
/20
10