Technical Specifications

ManualsBrandsOatey ManualsCleaners & PrimersMedium All Purpose Pipe Cement - 4 oz.

Technical Specification

All Purpose

Clear Solvent Cement

Oatey Co.

4700 West 160 th St.

Cleveland, OH 44135

Phone: 1-800-321-9532

Phone: 1-800-321-9535

Visit www.oatey.com for Update

Page 1 of 3

Description

• Medium-bodied milky-clear cement for use on all

schedules and classes of ABS, PVC and CPVC* pipe

and fittings up to 6" diameter with interference fit.

• Lo-V.O.C. Solvent Cement meets California South

Coast Air Quality Management District (SCAQMD)

1168/316A or BAAQMD Method 40 and various

environmental requirements.

• Recommended for potable water, conduit and

DWV.

• Recommended application temperature 40°F to

110°F / 4°C to 43°C.

• Meets performance requirements of ASTM

D2564, D2235, F493.

• Always check local codes for acceptability of this

product.

*Consult Oatey Technical Service before using.

Listings

Maximum VOC per SCAQMD 1168/316A or BAAQMD Method 40: 490 g/L

INGREDIENTS (CAS Number)

Acetone (67-64-1), Amorphous Silica (112945-52-5),CPVC Resin (68648-82-8) Cyclohexanone (108-94-4),

Methyl Ethyl Ketone (78-93-3), PVC Resin (9002-86-2), Tetrahydrofuran (109-99-9)

MSDS Number: 1403E

Product Number

Size

Qty

Wgt

Product Number

Size

Qty

Wgt

30818

4 oz.

9 lbs.

30834

16 oz.

29 lbs.

308183

30821

308213

4 oz.

8 oz.

9 lbs.

15 lbs.

308343

30847

30848

16 oz.

32 oz.

Gallon

29 lbs.

50 lbs.

Summary of content (3 pages)

PAGE 1
All Purpose Clear Solvent Cement Technical Specification Description • Medium-bodied milky-clear cement for use on all schedules and classes of ABS, PVC and CPVC* pipe and fittings up to 6" diameter with interference fit. • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. • Recommended for potable water, conduit and DWV. • Recommended application temperature 40°F to 110°F / 4°C to 43°C.
PAGE 2
All Purpose Clear Solvent Cement Technical Specification CHEMICAL PROPERTIES Appearance Milky Clear Liquid Viscosity Min. 500 cps @73° F ± 2° F Density 7.79 ± 0.2 lbs/gallon Shelf Life 2 Years from Mfg. Date PHYSICAL PROPERTIES Lap Shear Strength (min. per ASTM Standards) 2 hours 250 psi 16 hours 500 psi 72 hours 900 psi Set Up Time 30° F to 50° F 50° F to 70° F 70° F to 90° F 5 – 6 minutes 3 – 4 minutes 1 – 2 minutes Precautions Read all information carefully before using this product.
PAGE 3
Technical Specification All Purpose Clear Solvent Cement Directions for Use Store and use at temperatures between 40°F and 110°F. At temperatures outside of this range, special care must be taken to prepare good joints and prevent exposure to solvents. Stir or shake before using; if jelly-like, don’t use. Do not thin. Check local building codes to verify that use of All Purpose Cement is allowed. 1. Cut pipe ends square, chamfer and clean pipe ends. 2. Check dry fit of pipe and fitting.