SDS

8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Value
Type
Form
Components
PEL 5 mg/m3 Mist.Petrolatum (CAS
8009-03-8)
PEL 2 mg/m3Tin (CAS 7440-31-5)
PEL 1 mg/m3 Fume.Zinc chloride (CAS
7646-85-7)
US. ACGIH Threshold Limit Values
Value
Type
Form
Components
STEL 20 mg/m3 Fume.Ammonium chloride (CAS
12125-02-9)
TWA 10 mg/m3 Fume.
TWA 5 mg/m3 Inhalable fraction.Petrolatum (CAS
8009-03-8)
TWA 2 mg/m3Tin (CAS 7440-31-5)
STEL 2 mg/m3 Fume.Zinc chloride (CAS
7646-85-7)
TWA 1 mg/m3 Fume.
US. NIOSH: Pocket Guide to Chemical Hazards
Value
Type
Form
Components
STEL 20 mg/m3 Fume.Ammonium chloride (CAS
12125-02-9)
TWA 10 mg/m3 Fume.
STEL 10 mg/m3 Mist.Petrolatum (CAS
8009-03-8)
TWA 5 mg/m3 Mist.
TWA 2 mg/m3Tin (CAS 7440-31-5)
STEL 2 mg/m3 Fume.Zinc chloride (CAS
7646-85-7)
TWA 1 mg/m3 Fume.
Biological limit values
No biological exposure limits noted for the ingredient(s).
Exposure guidelines
Occupational Exposure Limits are not relevant to the current physical form of the product.
Appropriate engineering
controls
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Eye
wash facilities and emergency shower must be available when handling this product.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles) and a face shield.
Skin protection
Hand protection
Wear appropriate chemical resistant gloves.
Other
Wear appropriate chemical resistant clothing.
Respiratory protection
In case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene
considerations
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Solid.
Form
Solid. Paste.
Color
Yellow.
Odor
Slight.
Oatey No. 95 Tinning Flux SDS US
922593 Version #: 03 Revision date: 19-February-2015 Issue date: 27-October-2014
3 / 7