Installation Instructions

#11 Liquid Flux
ENERAL INFORMATION:G
No. 95 Tinning Flux cleans, fluxes, and tins. This flux is especially designed for use in hot weather. This product is
lead©free and can be used on potable water systems.
APPLICATION
For clean sweat copper fittings, no pre©cleaning is necessary. Apply flux to tube and fittings. Heat and apply solid
wire solder. For other applications, clean excessive dirt and corrosion. Apply flux, heat and solder. The term "sweat"
is interchangeable with the term "soldering" and is used specifically with soldering copper tubing.
RESTRICTIONS AND CAUTIONS:
Stir, if separation occurs. DO NOT USE ON ELECTRICAL PARTS. To prevent corrosion, wash off excess flux
after soldering.
SAFETY INFORMATION:
This product can be irritating. Use adequate ventilation; avoid contact with skin and eyes. Refer to Material Safety
Data Sheet for further information.
3/26/03 9:54 AMUntitled Document
Page 1 of 1