Instructions / Assembly
Job Name Item #
Location
Engineer Contractor
PO # Tag
Representative
ALL-FLASH
®
NO-CALK
®
ROOF FLASHINGS
TECHNICAL SPECIFICATION
SPECIFICATIONS
Oatey All-Flash No-Calk Roof Flashings can be used in commercial and
residential applications where a watertight seal for roof penetrations around
the plumbing vent pipe is required.
APPROVALS AND LISTINGS
IAPMO Listed
DESCRIPTION
All dimensions in inches.
• Plastic Base Roof Flashing slides over DWV pipe for pitch to 45°.
• Metal Base Roof Flashing slides over DWV pipe for pitch to 40°.
• Patented All-Flash collar has tear-away ring allowing flashing to seal
different pipe diameters.
• Plastic base flashings are made of rigid thermoplastic.
• Aluminum base flashings are made of .032 stamped aluminum.
• Galvanized base flashings are made of 24 gauge galvanized steel.
• Non-fading sealing collar
• Approved for Type B installations.
• Not for hot-mopped or built-up roofs.
• Do not use paint or petroleum based products on plastic bases
or rubber collars.
Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | P: 1.800.321.9532 | oatey.com
Access BIM/Revit content through www.oatey.com
LCS ### | 6/17
NES Logo
Needed