Specification

Job Name Item #

Location

Engineer Contractor

PO # Tag

Representative

GALVANIZED BASE

NO-CALK

ROOF FLASHINGS

TECHNICAL SPECIFICATION

SPECIFICATIONS

Oatey Galvanized Base No-Calk Roof Flashings can be used in commercial and

residential applications where a watertight seal for roof penetrations around the

plumbing vent pipe is required.

APPROVALS AND LISTINGS

IAPMO Listed

DESCRIPTION

All dimensions in inches

• Roof Flashing slides over DWV pipe for pitch to 40°.

• Made of rust-proof, stamped 28 gauge galvanized steel.

• Non-fading sealing collar.

• Approved for Type B installations.

• Not for hot-mopped or built-up roofs.

• Do not use paint or petroleum based products on rubber collars.

Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | P: 1.800.321.9532 | oatey.com

Access BIM/Revit content through www.oatey.com

LCS 1946 04/24

PAGE 1
GALVANIZED BASE NO-CALK® ROOF FLASHINGS TECHNICAL SPECIFICATION Job Name Item # Location Engineer Contractor PO # Tag Representative SPECIFICATIONS Oatey Galvanized Base No-Calk Roof Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required. APPROVALS AND LISTINGS IAPMO Listed DESCRIPTION All dimensions in inches • Roof Flashing slides over DWV pipe for pitch to 40°.
PAGE 2
GALVANIZED BASE NO-CALK® ROOF FLASHINGS TECHNICAL SPECIFICATION PRODUCT SELECTOR GALVANIZED BASE NO-CALK® ROOF FLASHINGS P Product Number Description Length (L) 11536 1.25" Galvanized ESM Flashing 12.5 11549 1.5" Galvanized ESM Flashing 11552 Width (W) Pack Carton Weight 8.75 25 27lbs. 12.5 8.75 25 32lbs. 2" Galvanized ESM Flashing 14.5 10.75 25 28lbs. 11565 2.5" Galvanized ESM Flashing 14.5 10.75 25 30lbs.