Specification

Job Name Item #
Location
Engineer Contractor
PO # Tag
Representative
ALL-FLASH
®
HIGH-RISE
®
THERMOPLASTIC BASE
NO-CALK
®
ROOF FLASHINGS
TECHNICAL SPECIFICATION
SPECIFICATIONS
Oatey All-Flash High-Rise Thermoplastic No-Calk Roof Flashings can be
used in commercial and residential applications where a watertight seal
for roof penetrations around the plumbing vent pipe is required. High-Rise
Roof Flashings have a larger draw than standard roof ashings and are
ideal for steep pitched roofs.
APPROVALS AND LISTINGS
IAPMO Listed
DESCRIPTION
All dimensions in inches.
• Roof Flashing slides over DWV pipe for pitch to 60°.
• All-Flash collar has tear-away ring allowing ashing to seal various
pipe diameters.
• Non-fading, non-cracking rigid black thermoplastic base.
• Non-fading sealing collar.
• Approved for Type B installations.
• Not for hot-mopped or built-up roofs.
• Do not use paint or petroleum based products on plastic bases or
rubber collars.
Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | P: 1.800.321.9532 | oatey.com
Access BIM/Revit content through www.oatey.com
LCS1945 04/24
ALL-FLASH
®
HIGH-RISE
®
THERMOPLASTIC BASE NO-CALK
®
ROOF FLASHINGS
P
Product Number Description
Length
(L)
Width
(W)
Pack Carton Weight
11930 1 ½" - 3" All-Flash High-Rise No-Calk Thermoplastic Roof Flashing 19 11-¼ 6 7 lbs.
11931 3" - 4" All-Flash High-Rise No-Calk Thermoplastic Roof Flashing 20 13 6 9 lbs.
PRODUCT SELECTOR
Data is subject to manufacturing tolerances.