User's Manual

Samsung ML-3050 / Dell 1815dn MFP 6
19 . Pull the drum axle out towards the direction of
the OPC drum drive gear (grey colored gear)
(Fig. 19).
Note: During reassembly, r
einsert the drum axle
into the contact side (thin black gear side) to
alleviate damaging the contact inside the drum.
Fig. 19
20. Hold the PCR by the white gear, push
towards the opposite side until it pops out of
the contact saddle, then pull out of the opposite
side saddle. Remove the PCR and clean with a
lint-free cloth and water (Fig. 20).
Fig. 20
21. Remove the two screws that hold the wiper
blade with a Phillips screwdriver. Clean the
wiper blade with compressed air and vacuum
(Fig. 21).
Fig. 21
22. Clean the waste hopper using compressed
air and vacuum. Check the recovery blade and
replace if necessary (Fig. 22).
Fig. 22