User's Manual

Samsung ML-3050 / Dell 1815dn MFP 5
15. Slide the developer roller to the left (1), then
right and out of the hopper section (2).
Clean the developer roller with compressed air
and vacuum. Clean with a cloth and Isopropyl
Alcohol if necessary (Fig 15).
16 . Remove the two screws that hold the doctor
blade with a Phillips screwdriver (Fig. 16). Clean
the doctor blade with compressed air and
vacuum. Clean with a cloth and Isopropyl Alcohol
if necessary.
Fig. 16
17 . Gently remove the fill plug with a small flat
screwdriver and blow out and vacuum the
inside of the toner hopper (Fig. 17).
Fig. 17
18. Use a small flathead screwdriver to pry off the
E clip from the OPC drum axle (Fig. 18).
Fig. 18
Fig. 15
2
1
Waste Hopper Disassembly