User's Manual

Samsung ML-3050 / Dell 1815dn MFP 3
7. Using a Phillips screwdriver, remove the three
screws on the gear side end cap (Fig. 7).
Fig.
7
8. Using a small flathead screwdriver, depress
the locking tab on the gear side end cap (Fig. 8).
Pry off the end cap as in step 4.
Fig. 8
9. Remove the PCR cleaning roller housing
and clean the roller with compressed air and
vacuum
(Fig. 9).
Fig. 9
10. Spread tabs apart on both sides of the
cartridge while lifting on the OPC drum axle to
separate the toner hopper from the waste
hopper (Fig. 10).
Fig. 10