User guide

5
GROUNDING
GROUNDING INSTRUCTIONS (ELECTRIC MODEL ONLY)
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electrical current to reduce
the risk of electric shock. This product is equipped with a cord having an
equipment-groundingconductorandagroundingplug.Theplug must be
plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances. See U.S. sample below.
Thisproductismanufacturedforuseonanominal120-voltcircuitforthe
UnitedStatesandanominal220-voltcircuitforuseinEurope.Theplughas
a grounding pin in a pattern that varies by country as shown in the Product
Identification section of this manual. Make sure that the product is connected
to an outlet having the same configuration as the plug.
DANGER-Improperconnectionoftheequipment-groundingconductor
canresultinariskofelectricshock.Checkwithaqualifiedelectrician
or service man if you are in doubt as to whether the product is properly
grounded.Donotmodifytheplugprovidedwiththeproduct-ifitwillnot
fit the outlet, have a proper outlet installed by a qualified electrician.
To reduce the risk of electric shock, this furnishing has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.
CAUTION
READ AND
SAVE THESE
INSTRUCTIONS
IMPORTANT
Correct Implementation
Incorrect Implementation
Figure A Figure B
 